广州矿物纤维隔音喷涂棉
  • 广州矿物纤维隔音喷涂棉
  • 广州矿物纤维隔音喷涂棉
  • 广州矿物纤维隔音喷涂棉

产品描述

随着人们对环保及节能的要求不断提升,国内节能标准地快速升级,人们也对环保的需求也从家居用品到室外建筑进行不断扩散,如今室外建筑及工程环保已成为国家节能减排至关重要的因素。正是因为这一改变,衍生出了矿物纤维喷涂行业,在国内不到十年的发展历史中快速成长,目前该技术被大量使用,进入快速发展时期。
广州矿物纤维隔音喷涂棉
超细无机纤维和专用喷涂胶粘剂经专用设备高速喷出,在喷头端口充分混合,以一定压力均匀喷涂在基体表面,从而形成密闭无缝的绝热吸声层。其表面平整、纤维分布均匀,无影响使用的分层、孔洞、裂缝等缺陷
好的无机纤维喷涂棉喷涂均匀,省棉,省时,用起来更经济。 产品性能:
1.有机物含量:≤0.5% 2.导热系数:≤0.044W/m.K(测试平均温度70℃+ 70±52℃),测试密度150kg/m3) 3.产品执行标准Q/T0IH 3-20055.
广州矿物纤维隔音喷涂棉
腐植酸钠(HA-Na)是腐植酸的钠盐,它是动、植物(主要是植物)经微生物长期作用后形成的一种大分子有机酸类物质,在土壤、低级别煤炭、动植物发酵废物等物质中广泛存在。用烧碱(氢氧化钠)溶液从上述物质中提取腐植酸,得到的溶液就是腐植酸钠溶液,经干燥后可得到腐植酸钠固体。
广州矿物纤维隔音喷涂棉
施工注意事项
Matters needing attention in construction
对喷涂后的保温吸声层,应提供通风、干燥环境,通常在平均温度25℃,相对湿度≤60%时,依据不同厚度干燥固化时间为24~72小时,此后可进行装饰等其他工序。
For the thermal insulation and sound absorption layer after spraying, ventilation and drying environment should be provided. Usually, when the average temperature is 25 C and the relative humidity is less than 60%, the drying and curing time is 24-72 hours according to different thickness. After that, other processes such as decoration can be carried out.
喷涂成品保护
PROTECTION OF SPRAYING PRODUCTS
喷涂前应安装各种管线、风道等设备吊挂件,避免喷涂完工后在基面钻孔、剔凿。
Before spraying, hangers of various pipelines, air ducts and other equipment should be installed to avoid drilling and chipping on the base after spraying.
喷涂成品在干燥固化期间,避免受到机械碰撞及雨水冲刷。
During the drying and solidification period, the finished product of spraying should be avoided from mechanical collision and rainwater erosion.
对于喷涂层局部因受到碰撞而造成破损时,应进行局部修补;对于经常处于容易受到机械碰撞的部位,可贴覆玻璃纤维布或其它防护材料,用以对纤维层表面进行保护。
Local repairs should be made when the sprayed coating is damaged due to collision. For those parts which are often vulnerable to mechanical collision, glass fiber cloth or other protective materials can be coated to protect the surface of the fiber layer.
保持喷涂区域环境清洁,避免灰尘飞扬,污染成品喷涂层表面。
Keep the spraying area clean, avoid dust flying, and pollute the surface of finished product spraying coating.
喷涂施工过程中,喷涂操作人员应按照国家劳动保护条例相关规定,佩带防尘口罩,高空操作人员应佩带安全带等防护用具。
During spraying construction, spraying operators should wear dust-proof masks and safety belts in accordance with the relevant provisions of the State Labor Protection Regulations.
-/gbadaig/-

http://www.dtkhcl.com

产品推荐