矿物纤维吸音喷涂棉供应
  • 矿物纤维吸音喷涂棉供应
  • 矿物纤维吸音喷涂棉供应
  • 矿物纤维吸音喷涂棉供应

产品描述

作为矿物纤维喷涂施工行业的巨头企业对产品有着极高的要求,随着市场需求不断对产品进行研发,尤其在技术领域,更是体现出其差异化优势。严格按照国家对于保温材料的防火要求,外墙、室内很多的保温材料必须要达到A级防火,在矿物纤维喷涂领域以卓越的新兴保温技术著称。
矿物纤维吸音喷涂棉供应
矿物纤维 [1] 是从纤维状结构的矿物岩石中获得的纤维,主要组成物质为各种氧化物,如二氧化硅、氧化铝、氧化镁等,其主要来源为各类石棉,如温石棉,等。在对矿物质纤维进行简单的概述的基础上,介绍了几种常见的矿物质纤维,如硅酸铝纤维、玻璃纤维、石膏纤维、碳纤维等。矿物纤维在造纸工业中的应用越来越广泛。它的一些优良性能能够使纸张具备植物纤维没有的功能。
矿物纤维吸音喷涂棉供应
施工注意事项
Matters needing attention in construction
对喷涂后的保温吸声层,应提供通风、干燥环境,通常在平均温度25℃,相对湿度≤60%时,依据不同厚度干燥固化时间为24~72小时,此后可进行装饰等其他工序。
For the thermal insulation and sound absorption layer after spraying, ventilation and drying environment should be provided. Usually, when the average temperature is 25 C and the relative humidity is less than 60%, the drying and curing time is 24-72 hours according to different thickness. After that, other processes such as decoration can be carried out.
喷涂成品保护
PROTECTION OF SPRAYING PRODUCTS
喷涂前应安装各种管线、风道等设备吊挂件,避免喷涂完工后在基面钻孔、剔凿。
Before spraying, hangers of various pipelines, air ducts and other equipment should be installed to avoid drilling and chipping on the base after spraying.
喷涂成品在干燥固化期间,避免受到机械碰撞及雨水冲刷。
During the drying and solidification period, the finished product of spraying should be avoided from mechanical collision and rainwater erosion.
对于喷涂层局部因受到碰撞而造成破损时,应进行局部修补;对于经常处于容易受到机械碰撞的部位,可贴覆玻璃纤维布或其它防护材料,用以对纤维层表面进行保护。
Local repairs should be made when the sprayed coating is damaged due to collision. For those parts which are often vulnerable to mechanical collision, glass fiber cloth or other protective materials can be coated to protect the surface of the fiber layer.
保持喷涂区域环境清洁,避免灰尘飞扬,污染成品喷涂层表面。
Keep the spraying area clean, avoid dust flying, and pollute the surface of finished product spraying coating.
喷涂施工过程中,喷涂操作人员应按照国家劳动保护条例相关规定,佩带防尘口罩,高空操作人员应佩带安全带等防护用具。
During spraying construction, spraying operators should wear dust-proof masks and safety belts in accordance with the relevant provisions of the State Labor Protection Regulations.
矿物纤维吸音喷涂棉供应
产品名称:矿物纤维
1.产品概述:矿物纤维是从纤维状结构的矿物岩石中获得的纤维,主要组成物质为各种氧化物,如二氧化硅、氧化铝、氧化镁等,其主要来源为各类石棉,如温石棉,等。
2.外观:纤维状
3.用途:具有良好的分散性,适合用各类混料机混拌。用本厂人造岩棉纤维所生产的制动衬片产品,磨削面无棉团颗粒,产品外观均匀一致,质感好。在生产工艺中配有专用分离渣球的设备对渣球进行分离,渣球含量低;<3%,制成制动衬片后,制运噪音小。
4.储运条件:存放于干燥处,勿使受潮,避免高温,并与酸碱物隔离。
5.包装:25公斤/袋,外编内塑。
-/gbadaig/-

http://www.dtkhcl.com

产品推荐