东莞矿物纤维喷涂棉
  • 东莞矿物纤维喷涂棉
  • 东莞矿物纤维喷涂棉
  • 东莞矿物纤维喷涂棉

产品描述

矿物纤维喷涂与市场上具有防火、保温、吸声降噪等功能的传统材料相比,具有独特的技术、功能优势。
  1.矿物纤维喷涂具有防火、保温、吸声降噪的三大特性,可同时解决多重问题、减少重复施工。
  2.适合任何建筑形状表面,尤其适合复杂结构和异型结构表面,保持建筑原有构造。
  3.无接缝,具有较好密闭性、可提高综合节能效果。
  4.适合钢材、混凝土、木材、铝塑板等基材表面。
  5.采用专业化喷涂设备,施工便捷、效率高,节省人工及时间。
  6.表面可进行不同的装饰处理,增加其美观性和装饰效果。
东莞矿物纤维喷涂棉
随着人们对环保及节能的要求不断提升,国内节能标准地快速升级,人们也对环保的需求也从家居用品到室外建筑进行不断扩散,如今室外建筑及工程环保已成为国家节能减排至关重要的因素。正是因为这一改变,衍生出了矿物纤维喷涂行业,在国内不到十年的发展历史中快速成长,目前该技术被大量使用,进入快速发展时期。
东莞矿物纤维喷涂棉
施工注意事项
Matters needing attention in construction
对喷涂后的保温吸声层,应提供通风、干燥环境,通常在平均温度25℃,相对湿度≤60%时,依据不同厚度干燥固化时间为24~72小时,此后可进行装饰等其他工序。
For the thermal insulation and sound absorption layer after spraying, ventilation and drying environment should be provided. Usually, when the average temperature is 25 C and the relative humidity is less than 60%, the drying and curing time is 24-72 hours according to different thickness. After that, other processes such as decoration can be carried out.
喷涂成品保护
PROTECTION OF SPRAYING PRODUCTS
喷涂前应安装各种管线、风道等设备吊挂件,避免喷涂完工后在基面钻孔、剔凿。
Before spraying, hangers of various pipelines, air ducts and other equipment should be installed to avoid drilling and chipping on the base after spraying.
喷涂成品在干燥固化期间,避免受到机械碰撞及雨水冲刷。
During the drying and solidification period, the finished product of spraying should be avoided from mechanical collision and rainwater erosion.
对于喷涂层局部因受到碰撞而造成破损时,应进行局部修补;对于经常处于容易受到机械碰撞的部位,可贴覆玻璃纤维布或其它防护材料,用以对纤维层表面进行保护。
Local repairs should be made when the sprayed coating is damaged due to collision. For those parts which are often vulnerable to mechanical collision, glass fiber cloth or other protective materials can be coated to protect the surface of the fiber layer.
保持喷涂区域环境清洁,避免灰尘飞扬,污染成品喷涂层表面。
Keep the spraying area clean, avoid dust flying, and pollute the surface of finished product spraying coating.
喷涂施工过程中,喷涂操作人员应按照国家劳动保护条例相关规定,佩带防尘口罩,高空操作人员应佩带安全带等防护用具。
During spraying construction, spraying operators should wear dust-proof masks and safety belts in accordance with the relevant provisions of the State Labor Protection Regulations.
东莞矿物纤维喷涂棉
无石棉矿物纤维特点及用途
具有良好的分散性,适合用各类混料机混拌。用本厂人造岩棉纤维所生产的制动衬片产品,磨削面无棉团颗粒,产品外观均匀一致,质感好。 在生产工艺中配有专用分离渣球的设备对渣球进行分离,渣球含量低;<3%,制成制动衬片后,制运噪音小。
-/gbadaig/-

http://www.dtkhcl.com

产品推荐